Install DYALOG and Ride under BULLSEYE
15 posts
• Page 1 of 2 • 1, 2
Install DYALOG and Ride under BULLSEYE
Dear all,
I tried to install Dyalog on the new version of Rasperry OS (BULLSEYE).
I followed the instructions given but fail at the installation of the packges:
sudo apt-get install dyalog-unicode
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package dyalog-unicode
However, the installation of the interpreter alone (dyalog-unicode-180) works.
I don't know why, but it seems there is an issue when using bullseye repository in the dyalog.list file.
Replacing it with buster it works and dyalog-unicode installs the interpreter and ride.
After installation, I cannot start Ride 4.3:
pi@raspberrypi:~ $ride-4.3
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
[4558:0114/115729.681897:FATAL:gpu_data_manager_impl_private.cc(894)] The display compositor is frequently crashing. Goodbye.
Trace/breakpoint trap
Any hints would be appreciated.
Regards Florian
I tried to install Dyalog on the new version of Rasperry OS (BULLSEYE).
I followed the instructions given but fail at the installation of the packges:
sudo apt-get install dyalog-unicode
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package dyalog-unicode
However, the installation of the interpreter alone (dyalog-unicode-180) works.
I don't know why, but it seems there is an issue when using bullseye repository in the dyalog.list file.
Replacing it with buster it works and dyalog-unicode installs the interpreter and ride.
After installation, I cannot start Ride 4.3:
pi@raspberrypi:~ $ride-4.3
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
[4558:0114/115729.681897:FATAL:gpu_data_manager_impl_private.cc(894)] The display compositor is frequently crashing. Goodbye.
Trace/breakpoint trap
Any hints would be appreciated.
Regards Florian
- bilekflo
- Posts: 28
- Joined: Wed Mar 12, 2014 10:07 pm
Re: Install DYALOG and Ride under BULLSEYE
Can you try launching RIDE this way?
/opt/ride-4.3/launcher --no-sandbox
Does that work?
John
/opt/ride-4.3/launcher --no-sandbox
Does that work?
John
- meijerjo
- Posts: 5
- Joined: Thu Jan 06, 2022 4:29 pm
Re: Install DYALOG and Ride under BULLSEYE
This should work too. Maybe less insecure?
/opt/ride-4.3/launcher --disable-features=VizDisplayCompositor
/opt/ride-4.3/launcher --disable-features=VizDisplayCompositor
- meijerjo
- Posts: 5
- Joined: Thu Jan 06, 2022 4:29 pm
Re: Install DYALOG and Ride under BULLSEYE
Hi meijerjo,
The first solution is working:
pi@raspberrypi:/opt/ride-4.3 $ ./launcher --no-sandbox <- This is OK.
The second shows errors but starts RIDE as well:
pi@raspberrypi:/opt/ride-4.3 $ /opt/ride-4.3/launcher --disable-features=VizDisplayCompositor
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
Should I register a bug at Ride GIT?
BR Florian
The first solution is working:
pi@raspberrypi:/opt/ride-4.3 $ ./launcher --no-sandbox <- This is OK.
The second shows errors but starts RIDE as well:
pi@raspberrypi:/opt/ride-4.3 $ /opt/ride-4.3/launcher --disable-features=VizDisplayCompositor
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0403
Should I register a bug at Ride GIT?
BR Florian
- bilekflo
- Posts: 28
- Joined: Wed Mar 12, 2014 10:07 pm
Re: Install DYALOG and Ride under BULLSEYE
Interesting I get no error with the second command, but I am running Ubuntu Server on my RPi4, not Raspbian so your error might be distro specific.
I'm no expert but I think the no-sandbox command might be less secure, so I'd use the latter if it works apart from the warnings.
John
I'm no expert but I think the no-sandbox command might be less secure, so I'd use the latter if it works apart from the warnings.
John
- meijerjo
- Posts: 5
- Joined: Thu Jan 06, 2022 4:29 pm
Re: Install DYALOG and Ride under BULLSEYE
I think that this error is distribution specific.
Further I checked now in the RIDE Git.
The problem is already known (https://github.com/Dyalog/ride/issues/796)
There the workaround is: ride --disable-seccomp-filter-sandbox
Florian
Further I checked now in the RIDE Git.
The problem is already known (https://github.com/Dyalog/ride/issues/796)
There the workaround is: ride --disable-seccomp-filter-sandbox
Florian
- bilekflo
- Posts: 28
- Joined: Wed Mar 12, 2014 10:07 pm
Re: Install DYALOG and Ride under BULLSEYE
Thanks for that information.
That flag works for me too, with no errors/warnings, under Ubuntu.
John
That flag works for me too, with no errors/warnings, under Ubuntu.
John
- meijerjo
- Posts: 5
- Joined: Thu Jan 06, 2022 4:29 pm
Re: Install DYALOG and Ride under BULLSEYE
I think the original problem was of my making .. I added bullseye to the list of supported Raspberry Pi codenames when I uploaded the most recent set of 18.0 images for the Pi - and completely forgot about both RIDE and the dyalog-unicode images.
I have (I believe) added bullseye to the list of supported codenames for both these packages, and at the same time I've added a signature to all three images.
Please let me know how you get on with these !
I have (I believe) added bullseye to the list of supported codenames for both these packages, and at the same time I've added a signature to all three images.
Please let me know how you get on with these !
-
AndyS|Dyalog - Posts: 263
- Joined: Tue May 12, 2009 6:06 pm
Re: Install DYALOG and Ride under BULLSEYE
I did remove interpreter and ride. Then I changed the dyalog.list file frombuster to bullseye.
Installation of dyalog-unicode works now correctly.
Thanks Andy.
However the start of ride still fails due to the problem I mentioned earlier in my previous post.
BR Florian
Installation of dyalog-unicode works now correctly.
Thanks Andy.
However the start of ride still fails due to the problem I mentioned earlier in my previous post.
BR Florian
- bilekflo
- Posts: 28
- Joined: Wed Mar 12, 2014 10:07 pm
Re: Install DYALOG and Ride under BULLSEYE
It looks like RIDE 4.3 will not run on bullseye.
We have therefore added the most recent pre-release of RIDE 4.4 to the Pi repos for bullseye, and we've updated the dyalog-unicode package to point to this.
So on buster and earlier you'll get 18.0 and RIDE 4.3, and on bullseye and later you'll get 18.0 and RIDE 4.4.
Jumping the gun slightly with RIDE 4.4, but it's due for release in the next few weeks, and is stable.
We have therefore added the most recent pre-release of RIDE 4.4 to the Pi repos for bullseye, and we've updated the dyalog-unicode package to point to this.
So on buster and earlier you'll get 18.0 and RIDE 4.3, and on bullseye and later you'll get 18.0 and RIDE 4.4.
Jumping the gun slightly with RIDE 4.4, but it's due for release in the next few weeks, and is stable.
-
AndyS|Dyalog - Posts: 263
- Joined: Tue May 12, 2009 6:06 pm
15 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: Majestic-12 [Bot] and 0 guests
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group